Description
- Origin: CN(Origin)
- Condition: New
- Type: Voltage Regulator
- Model Number: LM2596 Mini 360 DC-DC DC DC Buck Converter Step Down Module
- Supply Voltage: standard
- Dissipation Power: standard
- Operating Temperature: standard
- Package: SMD
- Type:: Mini360 LM2596 MT3608 MP1584EN
- Type:: Lm2596 dc-dc module
- Type:: Step Down
- Type:: Power Supply Module
- Type:: Buck Converter
- Type:: Adjustable Module
- Type:: Mini360 DC-DC
- Type:: Mini 360
- Type:: RC Airplane
-
Model Name: Mini-360 (ultra small size DC-DC synchronous rectifier buck module)
-
Module Properties: non-isolated buck
-
Rectification: synchronous rectification
-
Input voltage: 4.75V-23V
-
Output voltage: 1.0V-17V
-
Output Current: lowering the value of 3A, long 1.8A
-
Conversion efficiency: 96% (maximum)
-
Switching Frequency: 340KHz
-
Output ripple: 30mV (no-load)
-
Load regulation: ± 0.5%
-
Voltage regulation: ± 2.5%
-
Working temperature: -40 Celsius to +85 Celsius
-
Features: Use integrally molded power inductor and synchronous rectifier control chip, smaller and more efficient.
10pcs/LOT Newest Multi-function Mini Boost Module Step Up Board 5V/8V/9V/12V 1.5A LED Indicator Diy Electronic Voltage Module
1.Input voltage: DC 2.5V-Vout
2.Fixed Output voltage: 12V
Can set the DC 5V/8V/9V output
Output capacity:
input 3.7V battery, output 5V 1A, 8V 0.5A, 9V 0.45A, 12V 0.3A -
Input 5V, output 8V 0.7A, 9V 0.7A, 12V 0.5A
- 10pcs/lot MT3608 2A Max DC-DC Step Up Power Module Booster Power Module
-
Electrical Characteristics:
1. The Maximum Output Current: 2A.
2. The Input Voltage: 2V ~ 24V.
3. The Maximum Output Voltage: 28V.
4. Efficiency: Max 93%.
Mechanical Properties:
Product Size: 36 mm * 17 mm * 14 mm.Method Of Use:
The module of the IN+ and – after 2~24v, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage.
Matters Needing Attention:
1. The input voltage should not exceed the maximum input voltage.
2. The peak current output current is no more than TV university.
When the module output voltage can not be adjusted, the output voltage is always equal to the input voltage.Please adjust the potentiometer counterclockwise 20 laps or more. (Let potentiometer against your chest, counterclockwise turn boost)
10PCS/lot MINI jet BUCK DC-DC adjustable power supply DC voltage stabilizer module high efficiency BUCK module out 0.92-15V
1. This model is made of imported main control chip. The main control chip is fixed to 1.2MHz oscillation frequency, and MOS tube of ultra-low on resistance (Ron) is used internally. The overall work is stable and efficient.
2. This module has the functions of temperature protection and over-current protection, which can ensure the use safety of electrical appliances and modules.
3. This module is extremely small in size, only 20*20*5 (length, width and height), and less than 10g in weight. It is very suitable for large current and small volume applications, such as aviation models.
4. This module uses machine patch and reflow welding. At the same time, each module passes two hours of aging test before shipment to ensure reliability.
Module properties: non-isolated step-down module (BUCK)
Rectification mode: asynchronous rectification
Input voltage: 4.75V-24V
Output voltage: 0.92V-15v
Output Current: 2A
Conversion Efficiency: 95%
Switching frequency: 1.2MHz
Output ripple: 30mV (limited to large)
Load adjustment rate: ± 0.5%
Voltage adjustment rate: ± 2.5%
Operating temperature: -40 to + 85
Size: 20*20*5mm
10PCS/lot DC-DC voltage drop board 3A regulated power supply module MP1584EN 24V 12V 9V to 3.3V5V adjustable output
Output Current | Input voltage | Output voltage | Conversion Efficiency | Output ripple | Size |
3A(1.8A maximum) | 5.3V-26V | 3.3V | 96% | <30mV | 22.3mm*17mm |
3A(1.6A maximum) | 7V-26V | 5V | 96% | <30mV | 22.3mm*17mm |
3A(1.1A maximum) | 11V-26V | 9V | 96% | <30mV | 22.3mm*17mm |
3A(0.8A maximum) | 14V-26V | 12V | 96% | <30mV | 22.3mm*17mm |
3A | adjustable | 96% | <30mV | 22.3mm*17mm |
10PCS/lot Mini DC-DC 12-20V To 5V 3A Step Down Power Supply Module Buck Converter Adjustable Efficiency 97.5%
The volume of the whole network minimum, maximum 3A output.
Application areas:
DIY mobile power, communications equipment, power supply, all kinds of size and weight for demanding occasions (such as model airplane, etc.).
Brand: D-SUN (East is Red)
Model / Name |
Ultra-small DC-DC step-down module |
Input voltage |
4.5V ~ 28V |
Output voltage |
0.8V to 20V |
Output current |
3A (max) |
Conversion efficiency |
96% (the highest) |
Output ripple |
<30mV |
Switching frequency |
1.5MHz (highest), typical 1MHz |
Operating Temperature |
-45 to +85 |
Size |
22mm * 17mm * 4mm (L * W * H) |
|
|
10PCS/lot 24V Buck 3A Mini DC-DC Adjustable Buck Module 12V24V to 5V 3A 3.3V 9V
Size: 18.2(L)*10.3(W)*3.8(H)mm
The output current is 3A, and the long-term operation is 2.1A, with sufficient margin. 3A runs for about 20 seconds, the chip enters overheat protection and restarts, and it can work at 3A current by cooling the chip and dissipating heat.
Using a new scheme design, the circuit design does not require electrolytic capacitors and tantalum capacitors (electrolytic capacitors have a short life, and tantalum capacitors are at risk of explosion). Three large-size solid-state ceramic capacitors (MCCs) are used in high-end circuits.
Using non-isolated DC synchronous rectification, the circuit conversion efficiency is very high, the efficiency is as high as 97.5% when 6.5V to 5V 0.7A, and 94% when 12V to 5V 1A.
The integrated inductor is adopted, with ultra-low internal resistance, which maximizes the conversion efficiency. Reduce heat generation, improve efficiency, and lower heat generation than ordinary shielded inductors.
Small size, 18(L)*10(W)*3.8(H) mm, mini type.
In the case of 12V input, 5V output voltage, and the board with LED light indicator – the quiescent current is less than 0.45 mA. There is no need to add a switch to connect to the car battery, and it can be connected to the cigarette lighter line or the ACC power line.
The output is integrated with adjustable and fixed voltage. The fixed output does not need to be customized. It can be directly welded on the board. The special voltage can be adjusted with a potentiometer, and the versatility is very strong.
With an enable port, the default is the working mode, and the low level is closed, which brings convenience to control.
Reviews
There are no reviews yet.