Description

Origin: Mainland China
Item Type: Set

macro laser diode 808nm with 12A Max. Reverse Current and 21v Max. Forward Voltage

About diode laser hair removal parts
Do you want diode laser hair removal parts repair?
Are you trying to assemble a diode laser hair removal instrument?
Do you need to send a picture to us to view the parameters?
Do you need our more replacement parts data and methods?
Not only with operation video, but also maintenance and maintenance video, one- stop service, you can feel at home!

1.product display

2.Specification

3.Dimension

4.product description

This Diode laser 810nm 10bars 500w for hair remover system with Germany laser bar and Germany macro channel cooling.It is used for many brand of hair remova handle piece repairing and replacement.Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various diode laser stacks.

(1)Features

>Diode laser bar from Jenoptik
>Macro channel assembly by soft soldering

>lifetime: over 10000 hours
>Special design for macro channel diode laser machine

This diode laser stack 10bar Model A for hair removal which has 10bars with a aluminum shell. The water holes are on the back of the stack. Electrodes are on the back of stack also.

It is used for most of diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064.
This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

In the past 10 years, we have repaired various brands and different types of lasers (such as alma, dilas, focus light etc.), which are used on laser hair removal handle pieces.
Generally, the main problem of these diode laser stacks is:
Some or all of diode laser bars were burned.
Followings are some reasons that cause burning the diode bar problem
Temperature
* Using machine for too long time. it causes that the temperature becomes too high.
* The water flow rate is low. It causes the bad heat dissipation.
* The room temperature is a bit higher than normal, when using the machine.
Humidity
* The environment for the machine is too humid.
Quality
* Using bad quality diode bar.
* laser diode bar mounting technology couldn’t reach the standard.
* The electronic control parameters don’t suit for the diode laser stack

Oriental-Laser Provide Service:
Professional Laser Diode Stack Repair / replacement
Laser Diode Stack Customized
Service Warranty:
Oriental-laser offers 6 months warranty for the micro channel cooled laser stack.

5.Company informations