Description

10 bars new Laser Diode Stack Repair/update for diode laser hair removal

1.product display

 

2.Specification

Name	10bars 808nm diode
wavelength	808nm 810nm
laser bars	10bars  Germany imported
Maximum Operating Current	50A
Maximum Pulse Width	400ms
Maximum Duty Cycle	40%
Cooling	Macro channel
Maximum Voltage	20v
laser mounting	newest Ausn mounting technology

 

 

3.Dimension

There are several bottom plate can match with this Model C laser stack as below:

4.product description

This diode laser stack 10bar Model C for hair removal which has 10bars with a aluminum shell. The water hole is at the bottom. The electrode is on the back. 
It is used for most of diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064. 
This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

Repairing procedure	Advantages
>Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you.	>Save Money. Replace the broken diode stack only. Low cost and convenient
>Chioce B:  if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.	>Long life time.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before
>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece.	>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

 

In the past 10 years, we have repaired various brands and different types of macro channel and micro channel cooling lasers(such as alma, dilas, focus light etc.), which are used on laser hair removal handle pieces.
Generally, the main problem of these diode laser stacks is:
Some or all of diode laser bars were burned.
Followings are some reasons that cause burning the diode bar problem
Temperature
* Using machine for too long time. it causes that the temperature becomes too high.
* The water flow rate is low. It causes the bad heat dissipation.
* The room temperature is a bit higher than normal, when using the machine.
Humidity
* The environment for the machine is too humid.
Quality
* Using bad quality diode bar.
* laser diode bar mounting technology couldn’t reach the standard.
* The electronic control parameters don’t suit for the diode laser stack

Oriental-Laser Provide Service:
Professional Laser Diode Stack Repair / replacement
Laser Diode Stack Customized
Service Warranty:
Oriental-laser offers 6 months warranty for the micro channel cooled laser stack.

5.Company informations

 

6.Related Products（  Please click on the picture below） 

Welcome to contact me at any time.