Description

5V Micro USB Tiny AVR ISP ATtiny44 Module Micro USB Development Board

Graphic Details

ATTINY44 Module

Description:
USBtinyISP is a USB connector based ISP download designed for AVR.
Officially supported by Arduino IDE and compatible usbtinyisp, we can burn the Arduino bootloader to the chip and actually program any Atmel AVR microcontroller through a powerful AVR ISP programmer.
The tiny ISP programmer is able to provide a 5V supply voltage to the board being programmed. If you want to power the board through ISP, you must close the SJVCC jumper on the board.
Using this programmer, you can upload sketches and burn the Bootloader on any AVR based board, including Arduinos. By uploading sketches using an external programmer, you can delete the bootloader and use the extra space for the sketch. For Arduino ISP can also be used to burn the Arduino bootloader, so if the bootloader is accidentally damaged, you can recover the chip. Burning the bootloader is also required when you use a new ATmega microcontroller in Arduino, and you want to upload sketches through the USB serial connection using the bootloader. Supports ATTiny45 and ATTiny85 chips for arduino programming etc.

Specifications:
Supply voltage: 5 V
Microcontroller: ATtiny44 (datasheet)
Connection to computer: micro USB
Connection to target board: ICSP
Board size: 23x14mm (approx.)
How to use:
Connect Arduino ISP to the ICSP header of the Arduino board. Make sure to match the orientation of the plug by looking at the white dot on the corner of the connector
Open Arduino IDE, select the hardware name you downloaded in “board” Under “Burn bootloader” menu select “USBtinyISP” Then the bootlaoder starts downloading and finishes after 10 seconds (atmega328)