Description

1000 pcs, 5mm, Black 940nm IR LED, SIR5028B, Infrared emitting diode

Black 5mm(0.197″) 940nm Infrared LED SIR5028B

Continuous Forward Current: Max. 20 mA

Peak Forward Current: 0.2 A

Radiant Intensity: 5–7 mw/sr

Peak Wavelength: 940 nm

Reverse Current: Max. 10 uA

For detailed product parameters, please check the specifications and download the specifications from the company’s website

 

 

Infrared emission diode (IR LED) selection guide

  1. Choose the shape according to the product installation space

  Common infrared emission tubes are 3mm, 5mm, 8mm, 10mm, generally round head shape, flat head is a special product, the emission angle is large, please refer to point 3.

  2. Choose wavelength according to product characteristics

  Common wavelengths are 940nm, 850nm, 880nm, 890nm, 905nm, etc.

  940nm is generally used for infrared remote control, photoelectric switch, low-power fill light, etc., completely invisible to the human eye.

  850nm is generally used for infrared lighting, data transmission, optical communication, etc., and the human eye can see a slight red light.

  880nm and 890nm are generally used in medical cosmetology, medical equipment, etc., human eyes can see a slight red light.

  905nm is generally used for blood oxygen detection, etc. It is completely invisible to the human eye.

 3. Choose the angle according to the distance requirement

  Note that the angle of the infrared emitting tube is a half-power angle, not that there is no light outside the angle.

Under the same other conditions, the smaller the angle, the farther the transmission distance, and the larger the angle, the closer the   transmission distance.

  If you need a long transmission distance, please use a small angle; if the transmission range is large, please use a large angle.

  The flat head is a special product with a large emission angle, but the distance will be relatively close, and the luminous intensity will be uneven

  4. Choose chip size according to current usage and reliability

  The internal chip of the infrared emitting tube has different sizes, from 6mil to 45mil, the commonly used ones are 8mil, 9mil, 10mil, 12mil 14mil.

  16mil and above are high-power products

  The larger the chip size, the larger the current allowed to work, and the higher the reliability under the same conditions of use.

  The larger the chip size, the higher the price.

5. Choose the color according to the appearance requirements

  Infrared emission tubes are generally transparent, but also have other colors, such as black, blue, red, yellow, etc.

  Other colors have little effect on product performance, mainly to adapt to the appearance of the product.

6. Different brands of chips and packaging processes have an impact on the characteristics and reliability of the products. The company uses well-known brand chips, high-quality raw materials, dust-free workshops, and fully automated production. The products have undergone strict reliability tests.