Description

Baby name: fiber laser transmitter module

Baby power supply: 12V

Size: (PCB) 57mm*29mm

Output current: 190mA(MAX)

Signal input amplitude requirements: VPP>1V

(Note: Compatible DC version power supply is 5V)

(Location hole) 50mm

*22mm

(MAX)

1Hz~1KHz

Compatible with DC version 30mA

Signal input frequency: 1KHz~150MHz (default configuration),

(Customers need to configure by themselves, increase the C3, C6, C10, C11 capacitors, the higher the frequency

lower rate)

m

This module can convert any input modulated waveform signal into an optical signal, after laser emission

The injector emits light signals (low frequency can be directly emitted by LED lights

Or transmit optical signal through optical fiber, and then cooperate with another one of our shop

The avalanche diode optical signal receiving module can convert the received optical signal

It is converted into an electrical signal, so as to realize the electro-optical-photoelectric conversion and optical communication of the signal.

As shown in the connection test diagram, both modules are powered by 12V, and the output of the transmitter module is used for

The laser phototransmitting tube transmits the optical signal to the avalanche photoelectric connected to the input end of the receiving module

On the diode, due to the low power of the selected laser tube, the optical signal is not very concentrated.

Therefore, the test distance should be relatively close to get better results. Of course light

fiber for transmission, so the effect is also ideal