Description
Hamamatsu S11012-01CR 12-bit digital output, COB type
The S11012-01CR is a digital color sensor sensitive to red (λ=615 nm), green (λ=540 nm)、blue(λ=465 nm) regions of the spectrum. Detected signals are serially output as 12-bit digital data. Built-in three 12-bit registers allow simultaneous measurement of RGB three colors. Sensitivity level is adjustable in two steps to cover a wide photometric range.
Features
-12-bit digital output
-COB type
-Simultaneous measurement of RGB three colors
-2-step sensitivity switching (sensitivity ratio of 1:9)
-Low voltage (3.3V) operation
-CMOS monolithic photo IC
-No external components required
Specifications
| Product type | RGB digital color sensor |
|---|---|
| Package material | Plastic |
| Package type | COB type |
| Package size | 3.43 × 3.8 × 1.6 mm |
| Photosensitive area | 1.2 × 1.2 mm |
| Spectral response range (Blue) | 400 to 540, 800 to 1000 nm |
| Spectral response range (Green) | 480 to 600, 760 to 1000 nm |
| Spectral response range (Red) | 590 to 1000 nm |
| Photosensitivity Low range (Blue) | 0.3 LSB/lx |
| Photosensitivity Low range (Green) | 0.6 LSB/lx |
| Photosensitivity Low range (Red) | 1.4 LSB/lx |
| Photosensitivity High range (Blue) | 2.6 LSB/lx |
| Photosensitivity High range (Green) | 5.3 LSB/lx |
| Photosensitivity High range (Red) | 12.9 LSB/lx |
| Operating temperature | -20 to +80 deg.C |
| Storage temperature | -20 to +85 deg.C |
| Note | This sensor also has sensitivity in the infraredregion, so cut off infrared light as needed. |
| Measurement condition | Typ. Ta=25 deg.C, Vdd=5 V, Tg=100 ms, A light source, unless otherwise noted |
Reviews
There are no reviews yet.